Control Cables - NBR 7289 / 7290 / 16442

Black or white veins numbered sequentially, can be manufactured on customer request with a green track (protective conductor). It can also be built with coloured veins.

They are used in fixed installations in control, command and signalling circuits of electrical equipment, structured cabling, machine connections, push buttons, power supply, microprocessor systems, in the automation of substations, power plants, industrial and chemical areas, among others.
They are applied in fixed conduit systems (embedded or exposed), ducts, duct banks, cable trays, electrical panels, among other applications. This cable has good flexibility, resistance to UV, bad weather, humidity and certain chemicals.

In steady state: +90°C
Maximum short circuit temperature: +250°C (5s)

The INNOVCABLE Control Cable SB XLPE-HEPR/PVC - NBR 7290, can be manufactured in another section, dimensional or material at the customer's request. Innovcable reserves the right to modify this catalogue without prior notice.

OTHER CONSTRUCTION OPTIONS:
We can manufacture on request in other configurations.
1- Tinned Copper Conductor.
Class 2 stranding.
2- Different sections and number of veins, maximum up to:
- 71 x 0,50mm² / 71 x 2,50mm²
- 52 x 4,00mm² / 52 x 4,00mm².
- 42 x 6,00mm²
- 20 x 10,0mm²
3- Vein insulation material / other temperatures:
PVC/E -105ºC
PVC/A - 70 ºC
PE - 80 ºC
4- Material of the intermediate layer and the cover:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in classified areas (Ex)

Black or white veins numbered sequentially, can be manufactured on customer request with a green track (protective conductor). It can also be built with coloured veins.

They are used in fixed installations in control, command and signalling circuits of electrical equipment, structured cabling, machine connections, push buttons, power supply, microprocessor systems, in the automation of substations, power plants, industrial and chemical areas, among others.
They are applied in fixed systems of conduits (embedded or exposed), ducts, duct banks, cable trays, electrical panels, among other applications. It has collective protection in aluminized polyester tape against electromagnetic interferences. This cable has good flexibility, resistance to UV, bad weather, humidity and certain chemicals.

In steady state: +90°C
Maximum short circuit temperature: +250°C (5s)

The BF XLPE-HEPR/PVC - NBR 7290 control cable can be manufactured in other sections, dimensions or materials as requested by the customer. Innovcable reserves the right to modify this catalogue without prior notice.

CONSTRUCTION OPTIONS
We can manufacture other configurations on request.
1- Tinned Copper Conductor.
Class 2 stranding.
2- Different sections and number of veins, maximum up to
- 71 x 0,50mm² / 71 x 2,50mm²
- 52 x 4,00mm² / 52 x 4,00mm².
- 42 x 6,00mm²
- 20 x 10,0mm²
3- Vein insulation material / other temperatures:
PVC/E -105ºC
PE - 80 ºC
4- Cover material:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
5- Cover perfectly cylindrical for applications with cable glands in classified areas (Ex).

Black or white veins numbered sequentially, can be manufactured on customer request with a green track (protective conductor). It can also be built with coloured veins.

They are used in fixed installations in control, command and signalling circuits of electrical equipment, structured cabling, machine connections, push buttons, power supply, microprocessor systems, in the automation of substations, power plants, industrial and chemical areas, among others.
They are applied in fixed systems of conduits (embedded or exposed), ducts, duct banks, cable trays, electrical panels, among other applications. It has collective protection in aluminized polyester tape and copper tape against electromagnetic interference. This cable has good flexibility, resistance to UV, bad weather, humidity and certain chemicals.

In steady state: +90°C
Maximum short circuit temperature: +250°C (5s)

The BF FC XLPE-HEPR/PVC - NBR 7290 control cable can be manufactured in other sections, dimensions or materials at the customer's request. Innovcable reserves the right to change this catalogue without prior notice.

CONSTRUCTION OPTIONS
We can manufacture other configurations on request.
1- Tinned Copper Conductor.
Class 2 stranding.
2- Different sections and number of veins, maximum up to
- 71 x 0,50mm² / 71 x 2,50mm²
- 52 x 4,00mm² / 52 x 4,00mm².
- 42 x 6,00mm²
- 20 x 10,0mm²
3- Vein insulation material / other temperatures:
PVC/E -105ºC
PVC/A - 70 ºC
PE - 80 ºC
4- Material of the intermediate layer and the cover:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in classified areas (Ex)

Black or white veins numbered sequentially, can be manufactured on customer request with a green track (protective conductor). It can also be built with coloured veins.

They are used in fixed installations in control, command and signalling circuits of electrical equipment, structured cabling, machine connections, push buttons, power supply, microprocessor systems, in the automation of substations, power plants, industrial and chemical areas, among others.
They are applied in fixed systems of conduits (embedded or exposed), ducts, duct banks, cable trays, electrical panels, among other applications. It has collective protection against electromagnetic interference and mechanical protection of galvanized steel tape. This cable has good flexibility, resistance to UV, bad weather, humidity and certain chemicals.

In steady state: +90°C
Maximum short circuit temperature: +250°C (5s)

The BF FA XLPE-HEPR/PVC CONTROL CABLE - NBR 7290, can be manufactured in other section, dimensions or material, at the customer's request.

Innovcable reserves the right to modify this catalogue without prior notice.

CONSTRUCTION OPTIONS
We can manufacture other configurations on request.
1- Tinned Copper Conductor.
Class 2 stranding.
2- Different sections and number of veins, maximum up to
- 71 x 0,50mm² / 71 x 2,50mm²
- 52 x 4,00mm² / 52 x 4,00mm².
- 42 x 6,00mm²
- 20 x 10,0mm²
3- Vein insulation material / other temperatures:
PVC/E -105ºC
PVC/A - 70 ºC
PE - 80 ºC
4- Material of the intermediate layer and the cover:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in classified areas (Ex)

Black or white veins numbered sequentially, can be manufactured on customer request with a green track (protective conductor). It can also be built with coloured veins.

They are used in fixed installations in control, command and signalling circuits of electrical equipment, structured cabling, machine connections, push buttons, power supply, microprocessor systems, in the automation of substations, power plants, industrial and chemical areas, among others.
They are applied in fixed systems of conduits (embedded or exposed), ducts, duct banks, electro-roof gutters, electrical panels, among other applications. It has collective protection in aluminized polyester tape and copper braid against electromagnetic interference. This cable has good flexibility, resistance to UV, bad weather, humidity and certain chemicals.

In steady state: +90°C
Maximum short circuit temperature: +250°C (5s)

The BF BTC XLPE-HEPR/PVC CONTROL CABLE - NBR 7290, can be manufactured in other section, dimensions or material, at the customer's request.

Innovcable reserves the right to modify this catalogue without prior notice.

CONSTRUCTION OPTIONS
We can manufacture other configurations on request.
1- Tinned Copper Conductor.
Class 2 stranding.
2- Different sections and number of veins, maximum up to
- 71 x 0,50mm² / 71 x 2,50mm²
- 52 x 4,00mm² / 52 x 4,00mm².
- 42 x 6,00mm²
- 20 x 10,0mm²
3- Vein insulation material / other temperatures:
PVC/E -105ºC
PVC/A - 70 ºC
PE - 80 ºC
4- Material of the intermediate layer and the cover:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in classified areas (Ex)

Black or white veins numbered sequentially, can be manufactured on customer request with a green track (protective conductor). It can also be built with coloured veins.

They are used in fixed installations in control, command and signalling circuits of electrical equipment, structured cabling, machine connections, push buttons, power supply, microprocessor systems, in the automation of substations, power plants, industrial and chemical areas, among others.
They are applied in fixed systems of conduits (embedded or exposed), ducts, duct banks, cable trays, electrical panels, among other applications. It has collective protection against electromagnetic interference and mechanical protection of galvanized steel braid. This cable has good flexibility, resistance to UV, bad weather, humidity and certain chemicals.

In steady state: +90°C
Maximum short circuit temperature: +250°C (5s)

The BF BTA XLPE-HEPR/PVC CONTROL CABLE - NBR 7290, can be manufactured in other section, dimensions or material, at the customer's request.

Innovcable reserves the right to modify this catalogue without prior notice.

CONSTRUCTION OPTIONS
We can manufacture other configurations on request.
1- Tinned Copper Conductor.
Class 2 stranding.
2- Different sections and number of veins, maximum up to
- 71 x 0,50mm² / 71 x 2,50mm²
- 52 x 4,00mm² / 52 x 4,00mm².
- 42 x 6,00mm²
- 20 x 10,0mm²
3- Vein insulation material / other temperatures:
PVC/E -105ºC
PVC/A - 70 ºC
PE - 80 ºC
4- Material of the intermediate layer and the cover:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in classified areas (Ex)

Black or white veins numbered sequentially, can be manufactured on customer request with a green track (protective conductor). It can also be built with coloured veins.

They are used in fixed installations in control, command and signalling circuits of electrical equipment, structured cabling, machine connections, push buttons, power supply, microprocessor systems, in the automation of substations, power plants, industrial and chemical areas, among others.
They are applied in fixed systems of conduits (embedded or exposed), ducts, duct banks, electro-rails, electrical panels, among other applications. It has EMV electromagnetic interference protection. This cable has good flexibility, resistance to UV, bad weather, humidity and certain chemicals.

In steady state: +90°C
Maximum short circuit temperature: +250°C (5s)

The BTC XLPE-HEPR/PVC CONTROL CABLE - NBR 7290, can be manufactured in other section, dimensions or material, at the customer's request.

Innovcable reserves the right to modify this catalogue without prior notice.

CONSTRUCTION OPTIONS
We can manufacture other configurations on request.
1- Tinned Copper Conductor.
Class 2 stranding.
2- Different sections and number of veins, maximum up to
- 71 x 0,50mm² / 71 x 2,50mm²
- 52 x 4,00mm² / 52 x 4,00mm².
- 42 x 6,00mm²
- 20 x 10,0mm²
3- Vein insulation material / other temperatures:
PVC/E -105ºC
PVC/A - 70 ºC
PE - 80 ºC
4- Material of the intermediate layer and the cover:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in classified areas (Ex)

Black or white veins numbered sequentially, can be manufactured on customer request with a green track (protective conductor). It can also be built with coloured veins.

They are used in fixed installations in control, command and signalling circuits of electrical equipment, structured cabling, machine connections, push buttons, power supply, microprocessor systems, in the automation of substations, power plants, industrial and chemical areas, among others.
They are applied in fixed systems of conduits (embedded or exposed), ducts, duct banks, cable trays, electrical panels, among other applications. It has mechanical protection of galvanized steel braid. This cable has good flexibility, resistance to UV, bad weather, humidity and certain chemicals.

In steady state: +90°C
Maximum short circuit temperature: +250°C (5s)

The BTA XLPE-HEPR/PVC CONTROL CABLE - NBR 7290, can be manufactured in other sections, dimensions or material, at the customer's request.

Innovcable reserves the right to modify this catalogue without prior notice.

CONSTRUCTION OPTIONS
We can manufacture other configurations on request.
1- Tinned Copper Conductor.
Class 2 stranding.
2- Different sections and number of veins, maximum up to
- 71 x 0,50mm² / 71 x 2,50mm²
- 52 x 4,00mm² / 52 x 4,00mm².
- 42 x 6,00mm²
- 20 x 10,0mm²
3- Vein insulation material / other temperatures:
PVC/E -105ºC
PVC/A - 70 ºC
PE - 80 ºC
4- Material of the intermediate layer and the cover:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in classified areas (Ex)

Black or white veins numbered sequentially, can be manufactured on customer request with a green track (protective conductor). It can also be built with coloured veins.

They are used in fixed installations in control, command and signalling circuits of electrical equipment, structured cabling, machine connections, push buttons, power supply, microprocessor systems, in the automation of substations, power plants, industrial and chemical areas, among others.
They are applied in fixed systems of conduits (embedded or exposed), ducts, duct banks, electro-roof gutters, electrical panels, among other applications. They are mechanically protected by galvanized steel strips. This cable has good flexibility, resistance to UV, bad weather, humidity and certain chemicals.

EE in permanent regime: +90°C
Maximum short circuit temperature: +250°C (5s)

The BFA XLPE-HEPR/PVC CONTROL CABLE - NBR 7290, can be manufactured in other section, dimensions or material, at the customer's request.

Innovcable reserves the right to modify this catalogue without prior notice.

CONSTRUCTION OPTIONS
We can manufacture other configurations on request.
1- Tinned Copper Conductor.
Class 2 stranding.
2- Different sections and number of veins, maximum up to
- 71 x 0,50mm² / 71 x 2,50mm²
- 52 x 4,00mm² / 52 x 4,00mm².
- 42 x 6,00mm²
- 20 x 10,0mm²
3- Vein insulation material / other temperatures:
PVC/E -105ºC
PVC/A - 70 ºC
PE - 80 ºC
4- Material of the intermediate layer and the cover:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in classified areas (Ex)

Black or white veins numbered sequentially, can be manufactured on customer request with a green track (protective conductor). It can also be built with coloured veins.

They are used in fixed installations in control, command and signalling circuits of electrical equipment, structured cabling, machine connections, push buttons, power supply, microprocessor systems, in the automation of substations, power plants, industrial and chemical areas, among others.
They are applied in fixed systems of conduits (embedded or exposed), ducts, duct banks, electro-rails, electrical panels, among other applications. It has copper tape protection against electromagnetic interference. This cable has good flexibility, resistance to UV, weather, humidity and certain chemicals.

In steady state: +90°C
Maximum short circuit temperature: +250°C (5s)

The BFC XLPE-HEPR/PVC CONTROL CABLE - NBR 7290, can be manufactured in other section, dimensions or material, at the customer's request.

Innovcable reserves the right to modify this catalogue without prior notice.

CONSTRUCTION OPTIONS
We can manufacture other configurations on request.
1- Tinned Copper Conductor.
Class 2 stranding.
2- Different sections and number of veins, maximum up to
- 71 x 0,50mm² / 71 x 2,50mm²
- 52 x 4,00mm² / 52 x 4,00mm².
- 42 x 6,00mm²
- 20 x 10,0mm²
3- Vein insulation material / other temperatures:
PVC/E -105ºC
PVC/A - 70 ºC
PE - 80 ºC
4- Material of the intermediate layer and the cover:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in classified areas (Ex)