WELDING CABLES - NBR 8762

PVC / Rubber solderflex cables

    INNOVCABLE SOLDERFLEX PVC CABLE - NBR 8762 - 70°C

    1) Extra-flexible conductor, formed with electrolytic bare copper wires, soft temper, class 5 stranding.
    2) Polyester tape separator.
    3) Flexible PVC compound insulation.

    THIS PRODUCT'S DIFFERENTIALS.
    - 100% virgin copper
    - 100% electrolytic copper - 99.90% minimum pure (* including silver)
    - High flexibility class 5
    - Lower dielectric loss
    - Lower ohmic resistance
    - 100% Domestic

     

    Identification

    INNOVCABLE SOLDERFLEX PVC __mm² 750V 70°C OF: XXXX/YEAR - COMPLIANCE WITH NBR 8762.

    Applicable Specifications

    NBR 6251
    NBR NM 280 - Conductors and insulated cables.
    NBR 8762 - Flexible cables with cover for arc welding machines.
    NBR 6245 - Determination of the oxygen index.
    NBR NM 60332-3-24 - Vertical burning - bonfire.
    NBR 5111 - Round section bare copper wires for electrical purposes - Specification.
    NBR 5410 - Low voltage electrical installations. ¨It is recommended to observe the use and installation regulations.

    Applications

    Developed for use in arc welding equipment, for connecting the output of the power source to the electrode holder, the Solderflex PVC cable can be used in other applications that require extra-flexible cables. Due to its flexibility, it allows a small bending radius, enabling its use in places with reduced space and reducing the effort of the equipment operator.

    - Optimum flexibility;
    - Weather resistant and with UV protection.
    - Flame resistant.

    Maximum Conductor Temperature

    PVC: 70ºC

    Notes

    - We can produce on request several other cable options and configurations.
    - It can be built in other colours.
    - Innovcable reserves the right to change this catalogue without any prior notice.

    Download PDF português Download PDF EnglishDownload PDF Español

    INNOVCABLE SOLDERFLEX RUBBER CABLE - NBR 8762 - 125°C

    1) Extra-flexible conductor, formed with electrolytic bare copper wires, soft temper, class 5 stranding.
    2) Polyester tape separator.
    3) Insulation in special CEAC™ elastomeric compound.

    Identification

    INNOVCABLE SOLDERFLEX BORRACHA __mm² 750V 125°C OF: XXXX/YEAR - COMPLIANCE WITH NBR 8762.

    Applicable Specifications

    NBR 6251
    NBR NM 280 - Conductors and insulated cables.
    NBR 8762 - Flexible cables with cover for arc welding machines.
    NBR 6245 - Determination of the oxygen index.
    NBR NM 60332-3-24 - Vertical burning - bonfire.
    NBR 5111 - Round section bare copper wires for electrical purposes - Specification.
    NBR 5410 - Low voltage electrical installations. ¨It is recommended to observe the use and installation regulations.

    Applications

    Developed for use in arc welding equipment, for connecting the output of the power source to the electrode holder, the Solderflex Rubber cable can be used in other applications that require extra-flexible cables. Due to their great flexibility, they allow small bending radii, enabling their use in places with reduced space and reducing the effort of the equipment operator.

    - Optimum flexibility;
    - Good resistance to abrasion, twisting and dragging;
    - Good resistance to solar Ultra Violet rays (UV), diverse climatic conditions and situations of extreme exposure to bad weather
    - Good resistance to cutting and crushing;
    - Good resistance to grease, oils, hydrocarbons and chemical agents.
    - Good resistance to heat - possesses excellent performance in high temperature conditions.
    - Good resistance to detergents, aqueous fluids, acids, bases, saline solutions.
    - Flame resistant.

    Maximum Conductor Temperature

    CEAC™: 125°C

    Notes

    - We can produce on request several other cable options and configurations.
    - It can be built in other colours.
    - Innovcable reserves the right to change this catalogue without any prior notice.

    Download PDF português Download PDF EnglishDownload PDF Español