Instrumentation cables - NBR 10300
Instrumentation Cables Collective Shielding - BF (Copper/Steel Tape - Copper/Steel Mesh)
INNOVCABLE INSTRUMENTATION CABLE BF 300V NBR 10300
1) Stranded conductor formed by electrolytic bare copper wires, soft temper, class 2 NBR NM 280 stranding.
2) Thermoplastic compound insulation
based on polyvinyl chloride (PVC/A).
3) Conductors are assembled in pairs, suits or squares.
4) Pitch of twist: 50 to 65mm
5) Separator in polyester tape and collective shield in aluminized polyester tape, with flexible drain conductor of section 0,5 mm², formed by tinned electrolytic copper wires.
6) Communication cable formed by conductor stranded of section 0,50mm² isolation in (PVC/A) blue colour (when applied).
7) Covering in thermoplastic compound based on polyvinyl chloride (PVC/ST1) in black colour.
- Insulation voltage: 300V
- Routine tests:
Electrical resistance of the conductor at 20ºC
Alternating current electric tension
Insulation resistance.
THIS PRODUCT'S DIFFERENTIALS.
- 100% virgin copper
- 100% electrolytic copper - 99.90% minimum pure (* including silver)
- High flexibility class 5 (when requested)
- Bright colours
- Lower dielectric loss
- Lower ohmic resistance
- Anti-flame
- 100% National
- Hart ® protocol (4 - 20mA), digital and point-to-point instrumentation.
Identification
The pairs are made in Black and White, and the suits in Black, White and Red.
Applicable Specifications
Applications
They are used in fixed installations, for conducting analog (4 - 20mA) and digital signals, point-to-point instrumentation, Hart ® protocol, connections of various sensors and meters, power supply to conventional and electronic relays, in industrial environments in general.
The BF Instrumentation cables are recommended for cases where excellent levels of protection against external electromagnetic interferences are required, and maximum immunity against the emergence of "crosstalk" (crosstalk) between the various pairs/pairs, providing electrical discharge of the same.
Excellent flexibility, resistance to chemicals, humidity and UV rays, anti-flame and self-extinguishing, complying with vertical flame spread tests, according to NBR NM IEC 60332-3-23, category B.
Maximum Conductor Temperature
IN CONTINUOUS REGIME: 70ºC (PVC/A)
Notes
The BF INSTRUMENTATION CABLE can be manufactured in another section, dimensional or material at the customer's request. Innovcable reserves the right to modify this catalogue without prior notice.
CONSTRUCTION OPTIONS
We can manufacture other configurations on request.
1- Tinned Copper Conductor.
Stranding class 5.
2- Different sections and number of veins.
3- Insulation material of the veins / other temperatures:
PVC/E -105 ºC
XLPE - 125 ºC or 90 ºC
HEPR - 90 ºC
PE - 80 ºC
4- Material of the intermediate layer and the cover:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in classified areas (Ex)
INNOVCABLE INSTRUMENTATION CABLE BF FC 300V NBR 10300
1) Stranded conductor formed by electrolytic bare copper wires, soft temper, class 2 NBR NM 280 stranding.
2) Thermoplastic compound insulation
based on polyvinyl chloride (PVC/A).
3) Conductors in pairs, suits or blocks.
4) Pitch of torsion: 50 to 65mm
5) Separator in polyester tape and collective shield in aluminized polyester tape, with flexible drain conductor of section 0,5 mm², formed by tinned electrolytic copper wires.
6) Communication cable formed by stranded conductor of section 0,50mm² isolation in (PVC/A) blue colour (when applied)
7) Intermediate layer in thermoplastic compound based on polyvinyl chloride (PVC/ST1).
8) Shielding in copper tape.
9) Cover in thermoplastic compound based on polyvinyl chloride (PVC/ST1).
- Insulation voltage: 300V
- Routine tests:
Electrical resistance of the conductor at 20ºC
Alternating current electric tension
Insulation resistance.
THIS PRODUCT'S DIFFERENTIALS.
- 100% virgin copper
- 100% electrolytic copper - 99.90% minimum pure (* including silver)
- High flexibility class 5 (when requested)
- Bright colours
- Lower dielectric loss
- Lower ohmic resistance
- Anti-flame
- 100% National
- Hart ® protocol (4 - 20mA), digital and point-to-point instrumentation.
Identification
The pairs are made in Black and White, and the suits in Black, White and Red.
Applicable Specifications
Applications
They are used in fixed installations, for conducting analog (4 - 20mA) and digital signals, point-to-point instrumentation, Hart ® protocol, connections of various sensors and meters, power supply to conventional and electronic relays, in industrial environments in general.
The BF FC Instrumentation Cables are recommended for cases in which excellent levels of protection against external electromagnetic interferences are required, and maximum immunity against the emergence of "crosstalk" (crosstalk) between the various pairs/pairs/frames, providing electrical discharge of the same.
Excellent flexibility, resistance to chemicals, humidity and UV rays, anti-flame and self-extinguishing, complying with vertical flame spread tests, according to NBR NM IEC 60332-3-23, category B.
Maximum Conductor Temperature
IN CONTINUOUS REGIME: 70ºC (PVC/A)
Notes
The BF FC INSTRUMENTATION CABLE can be manufactured in another section, dimensional or material at the customer's request. Innovcable reserves the right to modify this catalogue without prior notice.
CONSTRUCTION OPTIONS
We can manufacture other configurations on request.
1- Tinned Copper Conductor.
Class 5 stranding.
2- Different sections and number of veins.
3- Insulation material of the veins / other temperatures:
PVC/E -105 ºC
XLPE - 125 ºC or 90 ºC
HEPR - 90 ºC
PE - 80 ºC
4- Material of the intermediate layer and the cover:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
LSZH (non-halogenated polyolefin compound)
5- Perfectly cylindrical cover for cable gland applications in classified areas (Ex).
INNOVCABLE INSTRUMENTATION CABLE BF FA 300V NBR 10300
1) Stranded conductor formed by electrolytic bare copper wires, soft temper, class 2 NBR NM 280 stranding.
2) Thermoplastic compound insulation
based on polyvinyl chloride (PVC/A).
3) Conductors in pairs, suits or blocks.
4) Pitch of torsion: 50 to 65mm
5) Separator in polyester tape and collective shield in aluminized polyester tape, with flexible drain conductor of section 0,5 mm², formed by tinned electrolytic copper wires.
6) Communication cable formed by stranded conductor of section 0,50mm² isolation in (PVC/A) blue colour (when applied)
7) Intermediate layer in thermoplastic compound based on polyvinyl chloride (PVC/ST1).
8) Shielding in galvanized steel ribbon.
9) Covering in thermoplastic compound based on polyvinyl chloride (PVC/ST1).
- Insulation voltage: 300V
- Routine tests:
Electrical resistance of the conductor at 20ºC
Alternating current electric tension
Insulation resistance.
THIS PRODUCT'S DIFFERENTIALS.
- 100% virgin copper
- 100% electrolytic copper - 99.90% minimum pure (* including silver)
- High flexibility class 5 (when requested)
- Bright colours
- Lower dielectric loss
- Lower ohmic resistance
- Anti-flame
- 100% National
- Hart ® protocol (4 - 20mA), digital and point-to-point instrumentation.
Identification
The pairs are made in Black and White, and the suits in Black, White and Red.
Applicable Specifications
Applications
They are used in fixed installations, for conducting analog (4 - 20mA) and digital signals, point-to-point instrumentation, Hart ® protocol, connections of various sensors and meters, power supply to conventional and electronic relays, in industrial environments in general.
The BF FA Instrumentation cables are recommended for cases in which excellent levels of protection against external electromagnetic interferences are required, as well as maximum immunity against the occurrence of "crosstalk" (crosstalk) between the several pairs/stations/frames, providing electrical discharge thereof. It has mechanical protection with the application of galvanized steel tape, providing excellent resistance to impacts and other mechanical demands.
Flexible, resistant to chemicals, humidity and UV rays, anti-flame and self-extinguishing, complying with the vertical flame propagation tests, according to NBR NM IEC 60332-3-23, category B.
Maximum Conductor Temperature
IN CONTINUOUS REGIME: 70ºC (PVC/A)
Notes
The BF FA INSTRUMENTATION CABLE can be manufactured in another section, dimensional or material at the customer's request. Innovcable reserves the right to modify this catalogue without prior notice.
CONSTRUCTION OPTIONS
We can manufacture other configurations on request.
1- Tinned Copper Conductor.
Class 5 stranding.
2- Different sections and number of veins.
3- Insulation material of the veins / other temperatures:
PVC/E -105 ºC
XLPE - 125 ºC or 90 ºC
HEPR - 90 ºC
PE - 80 ºC
4- Material of the intermediate layer and the cover:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
LSZH (non-halogenated polyolefin compound)
5- Perfectly cylindrical cover for cable gland applications in classified areas (Ex).
INNOVCABLE INSTRUMENTATION CABLE BF BTC 300V NBR 10300
1) Stranded conductor formed by electrolytic bare copper wires, soft temper, class 2 NBR NM 280 stranding.
2) Thermoplastic compound insulation
based on polyvinyl chloride (PVC/A).
3) Conductors in pairs, suits or blocks.
4) Pitch of torsion: 50 to 65mm
5) Separator in polyester tape and collective shield in aluminized polyester tape, with flexible drain conductor of section 0,5 mm², formed by tinned electrolytic copper wires.
6) Communication cable formed by stranded conductor of section 0,50mm² isolation in (PVC/A) blue colour (when applied)
7) Intermediate layer in thermoplastic compound based on polyvinyl chloride (PVC/ST1).
8) Shielding in copper wire mesh.
9) Thermoplastic covering made of polyvinyl chloride based thermoplastic compound (PVC/ST1).
- Insulation voltage: 300V
- Routine tests:
Electrical resistance of the conductor at 20ºC
Alternating current electric tension
Insulation resistance.
THIS PRODUCT'S DIFFERENTIALS.
- 100% virgin copper
- 100% electrolytic copper - 99.90% minimum pure (* including silver)
- High flexibility class 5 (when requested)
- Bright colours
- Lower dielectric loss
- Lower ohmic resistance
- Anti-flame
- 100% National
- Hart ® protocol (4 - 20mA), digital and point-to-point instrumentation.
Identification
The pairs are made in Black and White, and the suits in Black, White and Red.
Applicable Specifications
Applications
They are used in fixed installations, for conducting analog (4 - 20mA) and digital signals, point-to-point instrumentation, Hart ® protocol, connections of various sensors and meters, power supply to conventional and electronic relays, in industrial environments in general.
The BF BTC Instrumentation Cables are recommended for cases in which excellent levels of protection against external electromagnetic interferences are required, and maximum immunity against the emergence of "crosstalk" (crosstalk) between the various pairs/shunts/frames, providing electrical discharge of the same. Naked copper wire shielding provides greater flexibility. Cable resistant to chemicals, humidity and UV rays, anti-flame and self-extinguishing complying with vertical flame propagation tests, according to NBR NM IEC 60332-3-23, category B.
Maximum Conductor Temperature
IN CONTINUOUS REGIME: 70ºC (PVC/A)
Notes
The BF BTC INSTRUMENTATION CABLE can be manufactured in another section, dimensional or material at the customer's request. Innovcable reserves the right to modify this catalogue without prior notice.
CONSTRUCTION OPTIONS
We can manufacture other configurations on request.
1- Tinned Copper Conductor.
Class 5 stranding.
2- Different sections and number of veins.
3- Insulation material of the veins / other temperatures:
PVC/E -105 ºC
XLPE - 125 ºC or 90 ºC
HEPR - 90 ºC
PE - 80 ºC
4- Material of the intermediate layer and the cover:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
LSZH (non-halogenated polyolefin compound)
5- Perfectly cylindrical cover for cable gland applications in classified areas (Ex).
INNOVCABLE INSTRUMENTATION CABLE BF BTA 300V NBR 10300
1) Stranded conductor formed by electrolytic bare copper wires, soft temper, class 2 NBR NM 280 stranding.
2) Thermoplastic compound insulation
based on polyvinyl chloride (PVC/A).
3) Conductors in pairs, suits or blocks.
4) Pitch of torsion: 50 to 65mm
5) Separator in polyester tape and collective shield in aluminized polyester tape, with flexible drain conductor of section 0,5 mm², formed by tinned electrolytic copper wires.
6) Communication cable formed by stranded conductor of section 0,50mm² isolation in (PVC/A) blue colour (when applied)
7) Intermediate layer in thermoplastic compound based on polyvinyl chloride (PVC/ST1).
8) Shielding in galvanized steel wire mesh.
9) Cover in thermoplastic compound based on polyvinyl chloride (PVC/E).
- Insulation voltage: 300V
- Routine tests:
Electrical resistance of the conductor at 20ºC
Alternating current electric tension
Insulation resistance.
THIS PRODUCT'S DIFFERENTIALS.
- 100% virgin copper
- 100% electrolytic copper - 99.90% minimum pure (* including silver)
- High flexibility class 5 (when requested)
- Bright colours
- Lower dielectric loss
- Lower ohmic resistance
- Anti-flame
- 100% National
- Hart ® protocol (4 - 20mA), digital and point-to-point instrumentation.
Identification
The pairs are made in Black and White, and the suits in Black, White and Red.
Applicable Specifications
Applications
They are used in fixed installations, for conducting analog (4 - 20mA) and digital signals, point-to-point instrumentation, Hart ® protocol, connections of various sensors and meters, power supply to conventional and electronic relays, in industrial environments in general.
The BF BTA Instrumentation Cables are recommended for cases in which excellent levels of protection against external electromagnetic interference are required, and maximum immunity against the emergence of "crosstalk" (crosstalk) between the various pairs/shunts/frames, providing electrical discharge thereof. It has mechanical protection with the application of galvanized steel wire mesh, maintaining excellent flexibility and at the same time providing excellent resistance to impacts and other mechanical aggressions.
Flexible, resistant to chemicals, humidity and UV rays, anti-flame and self-extinguishing complying with vertical flame spread tests, according to NBR NM IEC 60332-3-23, category B.
Maximum Conductor Temperature
IN CONTINUOUS REGIME: 70ºC (PVC/A)
Notes
The BF BTA INSTRUMENTATION CABLE can be manufactured in another section, dimensional or material at the customer's request. Innovcable reserves the right to modify this catalogue without prior notice.
CONSTRUCTION OPTIONS
We can manufacture other configurations on request.
1- Tinned Copper Conductor.
Class 5 stranding.
2- Different sections and number of veins.
3- Insulation material of the veins / other temperatures:
PVC/E -105 ºC
XLPE - 125 ºC or 90 ºC
HEPR - 90 ºC
PE - 80 ºC
4- Material of the intermediate layer and the cover:
PE
PVC/E
PVC/ST2
Special PVC resistant to oils, grease and other chemicals.
LSZH (non-halogenated polyolefin compound)
5- Perfectly cylindrical cover for cable gland applications in classified areas (Ex).
