FLEXIBLE CABLES (Fixed use) NBR/IEC

Flexible Cables - NBR

    INNOVCABLE EVOLUFLEX CABLE 0,6/1kV HEPR/PVC 90°C - NBR 7286

    1-) Conductor: Electrolytic bare copper wires, soft temper, high flexibility, class 5 stranding, in accordance with NBR NM 280;
    2-) Insulation: HEPR 90°C, thermosetting compound in compliance with NBR 6251 standard for HEPR type (EPR/B).
    3-) Cover: polyvinyl chloride, complying with the physical requirements of NBR 6251, for type ST2.
    Note: For multipole cables, when necessary, polyvinyl chloride (PVC) filling will be applied, with helical application of polyester tape.

    A-) Mechanical characteristics:
    - Good mechanical resistance to impacts
    - Good Flexibility of the cable
    B-) Use characteristics
    -Ambient temperature (min/max): -5 / 60°C
    - Flame resistance: IEC 60332-1
    - Min. bending radius: 8 (xD)

    Identification

    - 1 conductor:
    Insulation: natural,
    Outer layer: black, light blue, red, white, green;
    - 2 conductors:
    Insulation: black and light blue,
    outer insulation: black;
    - 3 conductors:
    Insulation: black, white and light blue,
    Outer layer: black;
    - 4 conductors:
    Insulation: black, white, red and light blue,
    Outer layer: black;

    - OTHER COLOURS ON REQUEST.

    Applicable Specifications

    IEC 60332-1
    ABNT NBR 6251
    ABNT NBR NM 280
    ABNT NBR 7286

    Applications

    - Used as power cables for fixed installations, recommended in circuits requiring cables with greater flexibility for power supply and distribution circuits in residential, commercial, industrial buildings, transformer substations, etc. They are intended for general installations in outdoor conduits (in trays, shelves or similar supports), profiled, building spaces, as well as in underground systems, of the duct bank type or directly buried.
    - Due to the high conductor operating temperature achieved through thermosetting insulation, this cable has a higher current carrying capacity compared to cables with conventional thermoplastic insulation.
    The polyvinyl chloride (PVC) cover has excellent resistance to abrasion and low friction coefficient, allowing low cost, simple and safe installation, having non-flame propagation and self-extinguishing characteristics, according to NBR NM-IEC 60332-1

    Maximum Conductor Temperature

    The high thermal stability of thermosetting insulation (HEPR) enables use under the following conductor temperature conditions:
    - Permanent regime: 90 ºC
    - Overload conditions: 130 ºC
    - Short-circuit rating: 250

    Notes

    - The dimensions shown are nominal and therefore subject to normal manufacturing tolerances;
    - It may be manufactured in another section, dimensional or material at the customer's request.
    - Innovcable reserves the right to modify this catalogue without prior notice.

    Download PDF português Download PDF EnglishDownload PDF Español