Naval Cables – IEC Standard

– External Recording:
INNOVCABLE INNOVSHORE INSTRUMENTATION BF __mm² 0.6/1kV 90°C OF: XXXX/YEAR.

Of the conductors – through the colors of the insulation, being:
black and white (cables in pairs)
black, white and red (cables in bundles).
black, white, red and green (cables in blocks).*3

Identification through sequential numbering.

Built and designed for the demanding offshore drilling environment and the naval industry.
They are used in fixed installations, conducting analog (4 - 20MA) and digital signals, point -to -point instrumentation, Hart ® protocol, various sensor connections and meters, conventional and electronic relay feed, in general industrial environments. Naval cables Innovshore instrumentation BF instrumentation are recommended for cases where excellent levels of protection against external electromagnetic interference are required, and maximum immunity against the emergence of “diaphony) among the various pairs/tender, providing electric discharge. Excellent flexibility, resistance to chemicals, humidity and UV rays. Non-halogen and anti-flame cable, not producing toxic and corrosive gases.

CONTINUOUS SERVICE: 90°C – IEC 60092-360
SHORT CIRCUIT: 250°C

* We manufacture with other configurations:
1) The tinned copper conductor can be manufactured in class 2.
2) External cover colors: Nomenclature to be added to the end of the code: VM – Red // VD – Green // BR – White // PT – Black // AZ – Blue
We can manufacture other colors upon request.
3) Different sections and number of veins, maximum up to:
• 71 x 2 x 0.50mm² / 71 x 2 x 2.50mm²
• 71 x 3 x 0.50mm² / 71 x 3 x 2.50mm²
• 36 x 4 x 0 .50mm² / 36 x 4 x 2.50mm²
4) Material of vein insulation:

EPR
–

90
ºC
HEPR
–
90 ºC 7) Nomenclature to be added to the end of the code depending on the type of conductor:
Bare copper conductor – CN
Tinned copper conductor – SN

Naval cables instrumentation

**Innovcable reserves the right to change this catalog without prior notice.**

– External Recording:
INNOVCABLE INNOVSHORE INSTRUMENTATION BFI __mm² 0.6/1KV 90°C OF: XXXX/YEAR.

Of the conductors – through the colors of the insulation, being:
black and white (cables in pairs)
black, white and red (cables in bundles).
black, white, red and green (cables in blocks).*3

Identification through sequential numbering.

Built and designed for the demanding offshore drilling environment and the naval industry.
They are used in fixed installations, conducting analog (4 - 20MA) and digital signals, point -to -point instrumentation, Hart ® protocol, various sensor connections and meters, conventional and electronic relay feed, in general industrial environments. Naval cables Innovshore Instrumentation BFI Instrumentation are recommended for cases where excellent levels of protection against external electromagnetic interference is required, and maximum immunity against the emergence of “diaphony) among the various pairs/tender, providing their electrical discharge. Excellent flexibility, resistance to chemicals, humidity and UV rays. Armed cable with galvanized steel wires. Naval cables are not halogen and anti-flame, not producing toxic and corrosive gases.

CONTINUOUS SERVICE: 90°C – IEC 60092-360
SHORT CIRCUIT: 250°C

* We manufacture with other configurations:
1) The tinned copper conductor can be manufactured in class 2.
2) External cover colors: Nomenclature to be added to the end of the code: VM – Red // VD – Green // BR – White / / PT – Black // AZ – Blue // CZ – Grey.
We can manufacture other colors upon request.
3) Different sections and number of veins, maximum up to:
• 71 x 2 x 0.50mm² / 71 x 2 x 2.50mm²
• 71 x 3 x 0.50mm² / 71 x 3 x 2.50mm²
• 36 x 4 x 0 .50mm² / 36 x 4 x 2.50mm²
4) Material of vein insulation:

EPR
–

90
ºC
HEPR
–
90 ºC 7) Nomenclature to be added to the end of the code depending on the type of conductor:
Bare copper conductor – CN
Tinned copper conductor – SN

Naval cables instrumentation

**Innovcable reserves the right to change this catalog without prior notice.**

– External Recording:
INNOVCABLE INNOVSHORE INSTRUMENTATION BFIC __mm² 0.6/1kV 90°C OF: XXXX/YEAR.

Of the conductors – through the colors of the insulation, being:
black and white (cables in pairs)
black, white and red (cables in bundles).
black, white, red and green (cables in blocks).*3

Identification through sequential numbering.

Built and designed for the demanding offshore drilling environment and the naval industry.
They are used in fixed installations, conducting analog (4 - 20MA) and digital signals, point -to -point instrumentation, Hart ® protocol, various sensor connections and meters, conventional and electronic relay feed, in general industrial environments. Naval cables Innovshore Instrumentation Instrumentation Bfic 0.6/1KV are recommended for excellent levels of protection against external electromagnetic interference, and maximum immunity against the emergence of “CrossStalk” (diaphony) among the various pairs/tender, providing their electric discharge. Excellent flexibility, resistance to chemicals, humidity and UV rays. Armed cable with galvanized steel wires. No halogen and anti-flame, not producing toxic and corrosive gases.

CONTINUOUS SERVICE: 90°C – IEC 60092-360
SHORT CIRCUIT: 250°C

* We manufacture with other configurations:
1) The tinned copper conductor can be manufactured in class 2.
2) External cover colors: Nomenclature to be added to the end of the code: VM – Red // VD – Green // BR – White / / PT – Black // AZ – Blue // CZ – Grey.
We can manufacture other colors upon request.
3) Different sections and number of veins, maximum up to:
• 71 x 2 x 0.50mm² / 71 x 2 x 2.50mm²
• 71 x 3 x 0.50mm² / 71 x 3 x 2.50mm²
• 36 x 4 x 0 .50mm² / 36 x 4 x 2.50mm²
4) Material of vein insulation:

EPR
–

90
ºC
HEPR
–
90 ºC 7) Nomenclature to be added to the end of the code depending on the type of conductor:
Bare copper conductor – CN
Tinned copper conductor – SN

Naval cables instrumentation

**Innovcable reserves the right to change this catalog without prior notice.**

– External Recording:
INNOVCABLE INNOVSHORE INSTRUMENTATION ATC/ATS __mm² 0.6/1kV 90°C OF: XXXX/YEAR.

Of the conductors – through the colors of the insulation, being:
black and white (cables in pairs)
black, white and red (cables in bundles).
black, white, red and green (cables in blocks).*3

Identification through sequential numbering.

Built and designed for the demanding offshore drilling environment and the naval industry.
Armed cable prove protection where it is required.
They are used in fixed installations, conducting analog (4 - 20MA) and digital signals, point -to -point instrumentation, Hart ® protocol, various sensor connections and meters, conventional and electronic relay feed, in general industrial environments. Naval cables Innovshore instrumentation armed instrumentation ATC/ATS 0.6/1kV have excellent flexibility, resistance to chemicals, mobs and UV rays. Armed cable with galvanized steel wires. No halogen and anti-flame, not producing toxic and corrosive gases.

CONTINUOUS SERVICE: 90°C – IEC 60092-360
SHORT CIRCUIT: 250°C

* We manufacture with other configurations:
1) The tinned copper conductor can be manufactured in class 2.
2) External cover colors: Nomenclature to be added to the end of the code: VM – Red // VD – Green // BR – White / / PT – Black // AZ – Blue // CZ – Grey.
We can manufacture other colors upon request.
3) Different sections and number of veins, maximum up to:
• 71 x 2 x 0.50mm² / 71 x 2 x 2.50mm²
• 71 x 3 x 0.50mm² / 71 x 3 x 2.50mm²
• 36 x 4 x 0 .50mm² / 36 x 4 x 2.50mm²
4) Material of vein insulation:

EPR
–

90
ºC
HEPR
–
90 ºC 7) Nomenclature to be added to the end of the code depending on the type of conductor:
Bare copper conductor – CN
Tinned copper conductor – SN
8) Types of frames:
ATC – Bare copper wire braid frame
ATS – Braid frame of tinned copper wire

Naval cables instrumentation

**Innovcable reserves the right to change this catalog without prior notice.**

– External Recording:
INNOVCABLE INNOVSHORE INSTRUMENTATION ATA/AFC/AFA __mm² 0.6/1kV 90°C OF: XXXX/YEAR.

Of the conductors – through the colors of the insulation, being:
black and white (cables in pairs)
black, white and red (cables in bundles).
black, white, red and green (cables in blocks).*3

Identification through sequential numbering.

Built and designed for the demanding offshore drilling environment and the naval industry.
Armed cable prove protection where it is required.
They are used in fixed installations, conducting analog (4 - 20MA) and digital signals, point -to -point instrumentation, Hart ® protocol, various sensor connections and meters, conventional and electronic relay feed, in general industrial environments. Naval cables Innovshore Instrumentation Armed Instrumentation ATA/AFC/AFA 0.6/1KV have excellent flexibility, resistance to chemicals, humidity and UV rays. Armed cable with galvanized steel wires. No halogen and anti-flame, not producing toxic and corrosive gases.

CONTINUOUS SERVICE: 90°C – IEC 60092-360
SHORT CIRCUIT: 250°C

* We manufacture with other configurations:
1) The tinned copper conductor can be manufactured in class 2.
2) External cover colors: Nomenclature to be added to the end of the code: VM – Red // VD – Green // BR – White / / PT – Black // AZ – Blue // CZ – Grey.
We can manufacture other colors upon request.
3) Different sections and number of veins, maximum up to:
• 71 x 2 x 0.50mm² / 71 x 2 x 2.50mm²
• 71 x 3 x 0.50mm² / 71 x 3 x 2.50mm²
• 36 x 4 x 0 .50mm² / 36 x 4 x 2.50mm²
4) Material of vein insulation:

EPR
–

90
ºC
HEPR
–
90 ºC 7) Nomenclature to be added to the end of the code depending on the type of conductor:
Bare copper conductor – CN
Tinned copper conductor – SN
8) Types of frames:
ATA – Braided frame made of galvanized steel wires
AFC – Ribbon frame copper
AFA – Galvanized steel strip frame

Naval cables instrumentation

**Innovcable reserves the right to change this catalog without prior notice.**

– External Recording:
INNOVCABLE INNOVSHORE INSTRUMENTATION ATA/AFC/AFA BF __mm² 0.6/1kV 90°C OF: XXXX/YEAR.

Of the conductors – through the colors of the insulation, being:
black and white (cables in pairs)
black, white and red (cables in bundles).
black, white, red and green (cables in blocks).*3

Identification through sequential numbering.

Built and designed for the demanding offshore drilling environment and the naval industry.
Armed cable prove protection where it is required.
They are used in fixed installations, conducting analog (4 - 20MA) and digital signals, point -to -point instrumentation, Hart ® protocol, various sensor connections and meters, conventional and electronic relay feed, in general industrial environments. Naval cables Innovshore instrumentation armed/armored instrumentation ATA/AFC/AFA BF 0.6/1kV are recommended for excellent levels of external electromagnetic interference protection, and maximum immunity against the appearance of “diaphon” among the various pairs/tender, providing electric discharge. Excellent flexibility, resistance to chemicals, humidity and UV rays. Armed cable with galvanized steel wires. No halogen and anti-flame, not producing toxic and corrosive gases.

CONTINUOUS SERVICE: 90°C – IEC 60092-360
SHORT CIRCUIT: 250°C

* We manufacture with other configurations:
1) The tinned copper conductor can be manufactured in class 2.
2) External cover colors: Nomenclature to be added to the end of the code: VM – Red // VD – Green // BR – White / / PT – Black // AZ – Blue // CZ – Grey.
We can manufacture other colors upon request.
3) Different sections and number of veins, maximum up to:
• 71 x 2 x 0.50mm² / 71 x 2 x 2.50mm²
• 71 x 3 x 0.50mm² / 71 x 3 x 2.50mm²
• 36 x 4 x 0 .50mm² / 36 x 4 x 2.50mm²
4) Material of vein insulation:

EPR
–

90
ºC
HEPR
–
90 ºC 7) Nomenclature to be added to the end of the code depending on the type of conductor:
Bare copper conductor – CN
Tinned copper conductor – SN
8) Types of frames:
ATA – Braided frame made of galvanized steel wires
AFC – Ribbon frame copper
AFA – Galvanized steel strip frame

Naval cables instrumentation

**Innovcable reserves the right to change this catalog without prior notice.**

– External Recording:
INNOVCABLE INNOVSHORE INSTRUMENTATION ATA/AFC/AFA BFI __mm² 0.6/1kV 90°C OF: XXXX/YEAR.

Of the conductors – through the colors of the insulation, being:
black and white (cables in pairs)
black, white and red (cables in bundles).
black, white, red and green (cables in blocks).*3

Identification through sequential numbering.

Built and designed for the demanding offshore drilling environment and the naval industry.
Armed cable prove protection where it is required.
They are used in fixed installations, conducting analog (4 - 20MA) and digital signals, point -to -point instrumentation, Hart ® protocol, various sensor connections and meters, conventional and electronic relay feed, in general industrial environments. Naval cables Innovshore instrumentation armed/armored instrumentation/ATA/AFC/AFA BFI 0.6/1KV are recommended for excellent levels of protection against external electromagnetic interference, and maximum immunity against the emergence of “diaphon” among the various pairs/tender, providing electric discharge. Excellent flexibility, resistance to chemicals, humidity and UV rays. Armed cable with galvanized steel wires. No halogen and anti-flame, not producing toxic and corrosive gases.

CONTINUOUS SERVICE: 90°C – IEC 60092-360
SHORT CIRCUIT: 250°C

* We manufacture with other configurations:
1) The tinned copper conductor can be manufactured in class 2.
2) External cover colors: Nomenclature to be added to the end of the code: VM – Red // VD – Green // BR – White / / PT – Black // AZ – Blue // CZ – Grey.
We can manufacture other colors upon request.
3) Different sections and number of veins, maximum up to:
• 71 x 2 x 0.50mm² / 71 x 2 x 2.50mm²
• 71 x 3 x 0.50mm² / 71 x 3 x 2.50mm²
• 36 x 4 x 0 .50mm² / 36 x 4 x 2.50mm²
4) Material of vein insulation:

EPR
–

90
ºC
HEPR
–
90 ºC 7) Nomenclature to be added to the end of the code depending on the type of conductor:
Bare copper conductor – CN
Tinned copper conductor – SN
8) Types of frames:
ATA – Braided frame made of galvanized steel wires
AFC – Ribbon frame copper
AFA – Galvanized steel strip frame

Naval cables instrumentation

**Innovcable reserves the right to change this catalog without prior notice.**

– External Recording:
INNOVCABLE INNOVSHORE INSTRUMENTATION ATA/AFC/AFA BFIC __mm² 0.6/1kV 90°C OF: XXXX/YEAR.

Of the conductors – through the colors of the insulation, being:
black and white (cables in pairs)
black, white and red (cables in bundles).
black, white, red and green (cables in blocks).*3

Identification through sequential numbering.

Built and designed for the demanding offshore drilling environment and the naval industry.
Armed cable prove protection where it is required.
They are used in fixed installations, conducting analog (4 - 20MA) and digital signals, point -to -point instrumentation, Hart ® protocol, various sensor connections and meters, conventional and electronic relay feed, in general industrial environments. Naval cables Innovshore instrumentation armed/armored instrumentation/ATA/AFC/AFA BFI 0.6/1kV are recommended for excellent levels of external electromagnetic interference protection, and maximum immunity against the appearance of “diaphon” among the various pairs/tender, providing electric discharge. Excellent flexibility, resistance to chemicals, humidity and UV rays. Armed cable with galvanized steel wires. No halogen and anti-flame, not producing toxic and corrosive gases.

CONTINUOUS SERVICE: 90°C – IEC 60092-360
SHORT CIRCUIT: 250°C

* We manufacture with other configurations:
1) The tinned copper conductor can be manufactured in class 2.
2) External cover colors: Nomenclature to be added to the end of the code: VM – Red // VD – Green // BR – White / / PT – Black // AZ – Blue // CZ – Grey.
We can manufacture other colors upon request.
3) Different sections and number of veins, maximum up to:
• 71 x 2 x 0.50mm² / 71 x 2 x 2.50mm²
• 71 x 3 x 0.50mm² / 71 x 3 x 2.50mm²
• 36 x 4 x 0 .50mm² / 36 x 4 x 2.50mm²
4) Material of vein insulation:

EPR
–

90
ºC
HEPR
–
90 ºC 7) Nomenclature to be added to the end of the code depending on the type of conductor:
Bare copper conductor – CN
Tinned copper conductor – SN
8) Types of frames:
ATA – Braided frame made of galvanized steel wires
AFC – Ribbon frame copper
AFA – Galvanized steel strip frame

Naval cables instrumentation

**Innovcable reserves the right to change this catalog without prior notice.**

– External Recording:
INNOVCABLE INNOVSHORE INSTRUMENTATION ATC/ATS BF __mm² 0.6/1kV 90°C OF: XXXX/YEAR.

Of the conductors – through the colors of the insulation, being:
black and white (cables in pairs)
black, white and red (cables in bundles).
black, white, red and green (cables in blocks).*3

Identification through sequential numbering.

Built and designed for the demanding offshore drilling environment and the naval industry.
Armed cable prove protection where it is required.
They are used in fixed installations, conducting analog (4 - 20MA) and digital signals, point -to -point instrumentation, Hart ® protocol, various sensor connections and meters, conventional and electronic relay feed, in general industrial environments. Naval cables Innovshore Instrumentation Armed/Armored Instrumentation ATC/ATS BF 0.6/1kV are recommended for excellent levels of protection against external electromagnetic interference, and maximum immunity against the appearance of “Crossstalk” (diaphony) among the various pairs/tender, providing electric discharge of them. Excellent flexibility, resistance to chemicals, humidity and UV rays. Armed cable with galvanized steel wires. No halogen and anti-flame, not producing toxic and corrosive gases.

CONTINUOUS SERVICE: 90°C – IEC 60092-360
SHORT CIRCUIT: 250°C

* We manufacture with other configurations:
1) The tinned copper conductor can be manufactured in class 2.
2) External cover colors: Nomenclature to be added to the end of the code: VM – Red // VD – Green // BR – White / / PT – Black // AZ – Blue // CZ – Grey.
We can manufacture other colors upon request.
3) Different sections and number of veins, maximum up to:
• 71 x 2 x 0.50mm² / 71 x 2 x 2.50mm²
• 71 x 3 x 0.50mm² / 71 x 3 x 2.50mm²
• 36 x 4 x 0 .50mm² / 36 x 4 x 2.50mm²
4) Material of vein insulation:

EPR
–

90
ºC
HEPR
–
90 ºC 7) Nomenclature to be added to the end of the code depending on the type of conductor:
Bare copper conductor – CN
Tinned copper conductor – SN
8) Types of frames:
ATC – Bare copper wire braid frame
ATS – Braid frame of tinned copper wire

Naval cables instrumentation

**Innovcable reserves the right to change this catalog without prior notice.**

– External Recording:
INNOVCABLE INNOVSHORE INSTRUMENTATION ATC/ATS BFI __mm² 0.6/1kV 90°C OF: XXXX/YEAR.

Of the conductors – through the colors of the insulation, being:
black and white (cables in pairs)
black, white and red (cables in bundles).
black, white, red and green (cables in blocks).*3

Identification through sequential numbering.

Built and designed for the demanding offshore drilling environment and the naval industry.
They are used in fixed installations, conducting analog (4 - 20MA) and digital signals, point -to -point instrumentation, Hart ® protocol, various sensor connections and meters, conventional and electronic relay feed, in general industrial environments. Naval cables Innovshore Instrumentation Armed/Armored Instrumentation ATC/ATS BFI 0.6/1kV are recommended for excellent levels of protection against external electromagnetic interference, and maximum immunity against the emergence of “diaphon” among the various pairs/tender, providing electric discharge of them. Excellent flexibility, resistance to chemicals, humidity and UV rays. Armed cable with galvanized steel wires. No halogen and anti-flame, not producing toxic and corrosive gases.

CONTINUOUS SERVICE: 90°C – IEC 60092-360
SHORT CIRCUIT: 250°C

* We manufacture with other configurations:
1) The tinned copper conductor can be manufactured in class 2.
2) External cover colors: Nomenclature to be added to the end of the code: VM – Red // VD – Green // BR – White / / PT – Black // AZ – Blue // CZ – Grey.
We can manufacture other colors upon request.
3) Different sections and number of veins, maximum up to:
• 71 x 2 x 0.50mm² / 71 x 2 x 2.50mm²
• 71 x 3 x 0.50mm² / 71 x 3 x 2.50mm²
• 36 x 4 x 0 .50mm² / 36 x 4 x 2.50mm²
4) Material of vein insulation:

EPR
–

90
ºC
HEPR
–
90 ºC 7) Nomenclature to be added to the end of the code depending on the type of conductor:
Bare copper conductor – CN
Tinned copper conductor – SN
8) Types of frames:
ATS – Tinned copper wire braid frame
ATC – Braid frame of bare copper wires

Naval cables instrumentation

**Innovcable reserves the right to change this catalog without prior notice.**

– External Recording:
INNOVCABLE INNOVSHORE INSTRUMENTATION ATC/ATS BFIC __mm² 0.6/1kV 90°C OF: XXXX/YEAR.

Of the conductors – through the colors of the insulation, being:
black and white (cables in pairs)
black, white and red (cables in bundles).
black, white, red and green (cables in blocks).*3

Identification through sequential numbering.

Built and designed for the demanding offshore drilling environment and the naval industry.
They are used in fixed installations, conducting analog (4 - 20MA) and digital signals, point -to -point instrumentation, Hart ® protocol, various sensor connections and meters, conventional and electronic relay feed, in general industrial environments. Naval cables Innovshore Instrumentation Armed/Armored Instrumentation ATC/ATS BFI 0.6/1kV are recommended for excellent levels of protection against external electromagnetic interference, and maximum immunity against the appearance of “Crossstalk” (diaphony) among the various pairs/tender, providing electric discharge of them. Excellent flexibility, resistance to chemicals, humidity and UV rays. Armed cable with galvanized steel wires. No halogen and anti-flame, not producing toxic and corrosive gases.

CONTINUOUS SERVICE: 90°C – IEC 60092-360
SHORT CIRCUIT: 250°C

* We manufacture with other configurations:
1) The tinned copper conductor can be manufactured in class 2.
2) External cover colors: Nomenclature to be added to the end of the code: VM – Red // VD – Green // BR – White / / PT – Black // AZ – Blue // CZ – Grey.
We can manufacture other colors upon request.
3) Different sections and number of veins, maximum up to:
• 71 x 2 x 0.50mm² / 71 x 2 x 2.50mm²
• 71 x 3 x 0.50mm² / 71 x 3 x 2.50mm²
• 36 x 4 x 0 .50mm² / 36 x 4 x 2.50mm²
4) Material of vein insulation:

EPR
–

90
ºC
HEPR
–
90 ºC 7) Nomenclature to be added to the end of the code depending on the type of conductor:
Bare copper conductor – CN
Tinned copper conductor – SN
8) Types of frames:
ATS – Tinned copper wire braid frame
ATC – Braid frame of bare copper wires

Naval cables instrumentation

**Innovcable reserves the right to change this catalog without prior notice.**