PIVOT AND IRRIGATION CABLES – IEC 60502 – NBR 7287
Innovcable Pivot/Irrigation Cable 0.6/1kV XLPE/PVC 90°C
INNOVCABLE RV-K PIVOT/IRRIGATION CABLE 0.6/1kV XLPE/PVC 90°C
1. Conductor Flexible electrolytic copper (Class 5) in accordance with UNE-EN 60228, EN 60228 and IEC 60228
2. Insulation Cross-linked polyethylene (XLPE) type DIX-3 in accordance with UNE 21123 and HD 603S1
3. External jacket PVC type DMV -18 according to UNE 21123 and HD 603S1
Nominal voltage 0.6/1 kV
Test voltage 3,500 V AC
OTHER CHARACTERISTICS (DIFFERENTIALS):
-Does not spread flames in accordance with UNE-EN 60332, EN 60332 and IEC 60332.
-PVC coating with reduced emission of hydrochloric acid (HCl).
-For equal sections, cross-linked polyethylene (XLPE) admits a higher current density compared to PVC insulation.
Identification
Sequentially numbered colored veins:
Ex 1: 4×2.5mm² (red veins numbered sequentially) + 6×1.5mm² (white veins numbered sequentially).
Ex 2: 3×2.5mm² (red veins numbered sequentially) + 1 x 2.5mm² (black vein) + 6×1.5mm² (white veins numbered sequentially).
– OTHER COLORS ON REQUEST.
Applicable Specifications
Applications
– These cables are suitable for transporting and distributing low voltage electrical energy. Recommended for industrial connections, derivations, internal distribution and external connections. Can be used in underground networks and fixed installations. Due to their great flexibility, they are very suitable for complex and difficult installations.
Reference standards: UNE 21123, HD 603 S1 and IEC 60502, NBR 7287.
– Suitable for the following installations:
- Irrigation Pivots
- Underground networks for low voltage distribution
- Underground power supply networks for outdoor lighting installations
- Electricity distribution networks. Underground derivations
- Indoor facilities
- Installations in locations with special characteristics
Maximum Conductor Temperature
The high thermal stability of thermoset insulation (XLPE) allows use in the following conductor temperature conditions:
– Permanent regime: 90 ºC
– Overload regime: 130 ºC
– Short circuit regime: 250
For equal sections, cross-linked polyethylene (XLPE) admits a higher current density compared to PVC insulation.
Notes
– The dimensions shown are nominal and therefore subject to normal manufacturing tolerances;
– It can be manufactured in another section, dimensional or material at the customer’s request.
– Innovcable reserves the right to change this catalog without prior notice.
