Intrinsically safe cables
Intrinsic safety instrumentation cables
INNOVCABLE RE-2X(St)2YSWAY-fl
– Conductor material: bare copper wires
– Conductor class: according to DIN VDE 0295 class 4 and IEC 60228 cl. 4
– Vein Insulation: XLPE (special cross-linked polyethylene) 90°C
– White and black veins identified by sequential numerical recording.
– Layered twisted pairs.
– General shielding in aluminized polyester tape + 0.5mm² SN drain wire.
– Intermediate cover in special PE, black.
– Reinforced protection made of galvanized steel tape.
– External cover: special PVC resistant to oils, greases, acids.
– External cover in BLUE or BLACK color for intrinsically safe systems and depending on the required application.
– Nominal voltage: 300V
– Test voltage: 1,500 V
– Conductor resistance:
0.5mm² – max.36.7 MΩXKm;
0.75mm² – max.25.0 MΩXKm;
1.5mm² – max.14.2 MΩXKm;
– Resist. of insulation: Min.5 GΩX Km.
– Capacitance: max 115 nF/Km
– Inductivity: ca. 1mH/Km
– Coupling: max 500nF/ 500m
– Min radius. of curvature: 10 xd
Identification
– External identification recording:
INNOVCABLE INSTRUMENTATION CABLE INTRINSICALLY SAFE RE-2X(St)2YSWAY-fl nx 2 x mm² 300V 90°C OF: XXXX/YEAR.
Applicable Specifications
Applications
Instrumentation cable for lossless transmission, measurement and process control technology of analog and digital signals. For use in intrinsically safe Zone 1 and Zone 2 Group II classified areas in accordance with IEC 60079-14. Has UV protection (external use). Flame retardant and flame retardant in accordance with IEC 60332-1-2 and IEC 60332-3-24. Resistant to oils, greases, acids. Additional mechanical protection through the intermediate frame. Suitable for dry and humid environments. More stable at high frequencies and temperatures (90°C) due to the material used XLPE – (cross-linked PE). Low attenuation and minimization of the crosstalk effect due to special and differentiated shielding. Triple mechanical and electromagnetic interference protection.
Maximum Conductor Temperature
-40° C / +90° C
– Flame resistant and flame retardant in accordance with IEC 60332-1-2 and IEC 60332-3-24
– Can be made with other insulation:
Vein insulation material / other temperatures:
PVC/E -105ºC
XLPE – 125 ºC
HEPR – 90 ºC
PE – 80 ºC
Notes
We can manufacture upon request in other configurations.
1- Tinned copper conductor.
Stringing class 5.
2- Different sections and number of veins.
3-
Vein insulation material /
other
temperatures :
PVC
/
E
-105 ºC oils, greases and other chemicals. LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in hazardous areas (Ex)
– We can produce several other options and cable configurations upon request. Innovcable reserves the right to change this catalog without prior notice.
INNOVCABLE RE-2X(St)2YSWBY-fl
– Conductor material: bare copper wires
– Conductor class: according to DIN VDE 0295 class 4 and IEC 60228 cl. 4
– Vein Insulation: XLPE (special cross-linked polyethylene) 90°C
– White and black veins identified by sequential numerical recording.
– Layered twisted pairs.
– General shielding in aluminized polyester tape + 0.5mm² SN drain wire.
– Protective intermediate cover in special black PE.
– Reinforced protection made of galvanized steel wire braid.
– External cover: special PVC resistant to oils, greases, acids.
– External cover in BLUE or BLACK color for intrinsically safe systems and depending on the required application.
– Nominal voltage: 300V
– Test voltage: 1,500 V
– Conductor resistance:
0.5mm² – max.36.7 MΩXKm;
0.75mm² – max.25.0 MΩXKm;
1.5mm² – max.14.2 MΩXKm;
– Resist. of insulation: Min.5 GΩX Km.
– Capacitance: max 115 nF/Km
– Inductivity: ca. 1mH/Km
– Coupling: max 500nF/ 500m
– Min radius. curvature:10 xd
Identification
INNOVCABLE INSTRUMENTATIONCABLE INTRINSICALLY SAFE RE-2X(St)2YSWBY-fl nx 2 x mm² 300V 90°C OF: XXXX/YEAR.
Applicable Specifications
Applications
Instrumentation cable for lossless transmission, measurement and process control technology of analog and digital signals. For use in intrinsically safe Zone 1 and Zone 2 Group II classified areas in accordance with IEC 60079-14. Has UV protection (external use). Flame retardant and flame retardant in accordance with IEC 60332-1-2 and IEC 60332-3-24. Resistant to oils, greases, acids. Additional mechanical protection through the intermediate frame. Suitable for dry and humid environments. More stable at high frequencies and temperatures (90°C) due to the material used XLPE – (cross-linked PE). Low attenuation and minimization of the crosstalk effect due to special and differentiated shielding. Triple mechanical and electromagnetic interference protection.
Maximum Conductor Temperature
-40° C / +90° C
– Flame resistant and flame retardant in accordance with IEC 60332-1-2 and IEC 60332-3-24
– Can be made with other insulation:
Vein insulation material / other temperatures:
PVC/E -105ºC
XLPE – 125 ºC
HEPR – 90 ºC
PE – 80 ºC
Notes
We can manufacture upon request in other configurations.
1- Tinned copper conductor.
Stringing class 5.
2- Different sections and number of veins.
3-
Vein insulation material /
other
temperatures :
PVC
/
E
-105 ºC oils, greases and other chemicals. LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in hazardous areas (Ex)
– We can produce several other options and cable configurations upon request. Innovcable reserves the right to change this catalog without prior notice.
INNOVCABLE RE-2X(St)2YSWAY-fl PiMf
– Conductor material: bare copper wires
– Conductor class: according to DIN VDE 0295 class 4 and IEC 60228 cl. 4
– Vein Insulation: XLPE (special cross-linked polyethylene) 90°C
– White and black veins identified by sequential numerical recording.
– Individual shielding of the pairs with aluminized polyester tape (PIMf) with 0.6mm tinned drain wire.
– Layered twisted pairs.
– General shielding in aluminized polyester tape + 0.5mm² SN drain wire.
– Intermediate cover in special PE, black.
– Reinforced protection made of galvanized steel tape.
– External cover: special PVC resistant to oils, greases, acids.
– External cover in BLUE or BLACK color for intrinsically safe systems and depending on the required application.
– Nominal voltage: 300V
– Test voltage: 1,500 V
– Conductor resistance:
0.5mm² – max.36.7 MΩXKm;
0.75mm² – max.25.0 MΩXKm;
1.5mm² – max.14.2 MΩXKm;
– Resist. of insulation: Min.5 GΩX Km.
– Capacitance: max 115 nF/Km
– Inductivity: ca. 1mH/Km
– Coupling: max 500nF/ 500m
– Min radius. of curvature: 10 xd
Identification
INNOVCABLE INSTRUMENTATIONCABLE INTRINSICALLY SAFE RE-2X(St)2YSWAY-fl PiMf nx 2 x mm² 300V 90°C OF: XXXX/YEAR.
Applicable Specifications
Applications
Instrumentation cable for lossless transmission, measurement and process control technology of analog and digital signals. For use in intrinsically safe Zone 1 and Zone 2 Group II classified areas in accordance with IEC 60079-14. Has UV protection (external use). Flame retardant and flame retardant in accordance with IEC 60332-1-2 and IEC 60332-3-24. Resistant to oils, greases, acids. Additional mechanical protection through the intermediate frame. Suitable for dry and humid environments. More stable at high frequencies and temperatures (90°C) due to the material used XLPE – (cross-linked PE). Low attenuation and minimization of the crosstalk effect due to special and differentiated shielding. Triple mechanical and electromagnetic interference protection.
Maximum Conductor Temperature
-40° C / +90° C
– Flame resistant and flame retardant in accordance with IEC 60332-1-2 and IEC 60332-3-24
– Can be made with other insulation:
Vein insulation material / other temperatures:
PVC/E -105ºC
XLPE – 125 ºC
HEPR – 90 ºC
PE – 80 ºC
Notes
We can manufacture upon request in other configurations.
1- Tinned copper conductor.
Stringing class 5.
2- Different sections and number of veins.
3-
Vein insulation material /
other
temperatures :
PVC
/
E
-105 ºC oils, greases and other chemicals. LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in hazardous areas (Ex)
– We can produce several other options and cable configurations upon request. Innovcable reserves the right to change this catalog without prior notice.
INNOVCABLE RE-2X(St)2YSWBY-fl PiMf
– Conductor material: bare copper wires
– Conductor class: according to DIN VDE 0295 class 4 and IEC 60228 cl. 4
– Vein Insulation: XLPE (special cross-linked polyethylene) 90°C
– White and black veins identified by sequential numerical recording.
– Individual shielding of the pairs with aluminized polyester tape (PIMf) with 0.6mm tinned drain wire.
– Layered twisted pairs.
– General shielding in aluminized polyester tape + 0.5mm² SN drain wire.
– Protective intermediate cover in special black PE.
– Reinforced protection made of galvanized steel wire braid.
– External cover: special PVC resistant to oils, greases, acids.
– External cover in BLUE or BLACK color for intrinsically safe systems and depending on the required application.
– Nominal voltage: 300V
– Test voltage: 1,500 V
– Conductor resistance:
0.5mm² – max.36.7 MΩXKm;
0.75mm² – max.25.0 MΩXKm;
1.5mm² – max.14.2 MΩXKm;
– Resist. of insulation: Min.5 GΩX Km.
– Capacitance: max 115 nF/Km
– Inductivity: ca. 1mH/Km
– Coupling: max 500nF/ 500m
– Min radius. of curvature: 10 xd
Identification
INNOVCABLE INSTRUMENTATION CABLE INTRINSICALLY SAFE RE-2X(St)2YSWBY-fl PiMf nx 2 x mm² 300V 90°C OF: XXXX/YEAR.
Applicable Specifications
Applications
Instrumentation cable for lossless transmission, measurement and process control technology of analog and digital signals. For use in intrinsically safe Zone 1 and Zone 2 Group II classified areas in accordance with IEC 60079-14. Has UV protection (external use). Flame retardant and flame retardant in accordance with IEC 60332-1-2 and IEC 60332-3-24. Resistant to oils, greases, acids. Additional mechanical protection through the intermediate frame. Suitable for dry and humid environments. More stable at high frequencies and temperatures (90°C) due to the material used XLPE – (cross-linked PE). Low attenuation and minimization of the crosstalk effect due to special and differentiated shielding. Triple mechanical and electromagnetic interference protection.
Maximum Conductor Temperature
-40° C / +90° C
– Flame resistant and flame retardant in accordance with IEC 60332-1-2 and IEC 60332-3-24
– Can be made with other insulation:
Vein insulation material / other temperatures:
PVC/E -105ºC
XLPE – 125 ºC
HEPR – 90 ºC
PE – 80 ºC
Notes
We can manufacture upon request in other configurations.
1- Tinned copper conductor.
Stringing class 5.
2- Different sections and number of veins.
3-
Vein insulation material /
other
temperatures :
PVC
/
E
-105 ºC oils, greases and other chemicals. LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in hazardous areas (Ex)
– We can produce several other options and cable configurations upon request. Innovcable reserves the right to change this catalog without prior notice.
INNOVCABLE RE-2X(St)Yv-fl PiMf
– Conductor material: bare copper wires
– Conductor class: according to DIN VDE 0295 class 4 and IEC 60228 cl. 4
– Vein Insulation: XLPE (special cross-linked polyethylene) 90°C
– White and black veins identified by sequential numerical recording.
– Layered twisted pairs.
– Individual shielding of the pairs with aluminized polyester tape (PIMf) with 0.6mm tinned drain wire.
– General shielding in aluminized polyester tape + 0.5mm² SN drain wire.
– External cover: special PVC resistant to oils, greases, acids.
– External cover in BLUE or BLACK color for intrinsically safe systems and depending on the required application.
– Nominal voltage: 300V
– Test voltage: 1,500 V
– Conductor resistance:
0.5mm² – max.36.7 MΩXKm;
0.75mm² – max.25.0 MΩXKm;
1.5mm² – max.14.2 MΩXKm;
– Resist. of insulation: Min.5 GΩX Km.
– Capacitance: max 115 nF/Km
– Inductivity: ca. 1mH/Km
– Coupling: max 500nF/ 500m
– Min radius. curvature: 7.5 xd
Identification
INNOVCABLE INSTRUMENTATION CABLE INTRINSICALLY SAFE RE-2X(St)Yv-fl PiMf n _ x _ x mm² 300V 90°C OF: XXXX/YEAR.
Applicable Specifications
Applications
Instrumentation cable for lossless transmission, measurement and process control technology of analog and digital signals. For use in intrinsically safe Zone 1 and Zone 2 Group II classified areas in accordance with IEC 60079-14 (Application regulations must be observed). Has UV protection (external use). Flame retardant and flame retardant in accordance with IEC 60332-1-2 and IEC 60332-3-24. Resistant to oils, greases, acids. Suitable for dry and humid environments. More stable at high frequencies and temperatures (90°C) due to the material used XLPE – (cross-linked PE). Low attenuation and minimization of the crosstalk effect. Robust outer cover.
Maximum Conductor Temperature
-40° C / +90° C
– Flame resistant and flame retardant in accordance with IEC 60332-1-2 and IEC 60332-3-24
– Can be made with other insulation:
Vein insulation material / other temperatures:
PVC/E -105ºC
XLPE – 125 ºC
HEPR – 90 ºC
PE – 80 ºC
Notes
We can manufacture upon request in other configurations.
1- Tinned copper conductor.
Stringing class 5.
2- Different sections and number of veins.
3-
Vein insulation material /
other
temperatures :
PVC
/
E
-105 ºC oils, greases and other chemicals. LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in hazardous areas (Ex)
– We can produce several other options and cable configurations upon request. Innovcable reserves the right to change this catalog without prior notice.
INNOVCABLE RE-2X(St)Yv-fl
– Conductor material: bare copper wires
– Conductor class: according to DIN VDE 0295 class 4 and IEC 60228 cl. 4
– Vein Insulation: XLPE (special cross-linked polyethylene) 90°C
– White and black veins identified by sequential numerical recording.
– Layered twisted pairs.
– General shielding in aluminized polyester tape + 0.5mm² SN drain wire.
– External cover: special PVC resistant to oils, greases, acids.
– External cover in BLUE or BLACK color for intrinsically safe systems and depending on the required application.
– Nominal voltage: 300V
– Test voltage: 1,500 V
– Conductor resistance:
0.5mm² – max.36.7 MΩXKm;
0.75mm² – max.25.0 MΩXKm;
1.5mm² – max.14.2 MΩXKm;
– Resist. of insulation: Min.5 GΩX Km.
– Capacitance: max 115 nF/Km
– Inductivity: ca. 1mH/Km
– Coupling: max 500nF/ 500m
– Min radius. curvature: 7.5 xd
Identification
INNOVCABLE INSTRUMENTATION CABLE INTRINSICALLY SAFE RE-2X(St)Yv-fl n _x _ x mm² 300V 90°C OF: XXXX/YEAR
Applicable Specifications
Applications
Instrumentation cable for lossless transmission, measurement and process control technology of analog and digital signals. For use in intrinsically safe Zone 1 and Zone 2 Group II classified areas in accordance with IEC 60079-14 (Application regulations must be observed). Has UV protection (external use). Flame retardant and flame retardant in accordance with IEC 60332-1-2 and IEC 60332-3-24. Resistant to oils, greases, acids. Suitable for dry and humid environments. More stable at high frequencies and temperatures (90°C) due to the material used XLPE – (cross-linked PE). Low attenuation and minimization of the crosstalk effect. Robust outer cover.
Maximum Conductor Temperature
-40° C / +90° C
– Flame resistant and flame retardant in accordance with IEC 60332-1-2 and IEC 60332-3-24
– Can be made with other insulation:
Vein insulation material / other temperatures:
PVC/E -105ºC
XLPE – 125 ºC
HEPR – 90 ºC
PE – 80 ºC
Notes
We can manufacture upon request in other configurations.
1- Tinned copper conductor.
Stringing class 5.
2- Different sections and number of veins.
3-
Vein insulation material /
other
temperatures :
PVC
/
E
-105 ºC oils, greases and other chemicals. LSZH (non-halogenated polyolefin compound).
5- Perfectly cylindrical cover for cable gland applications in hazardous areas (Ex)
– We can produce several other options and cable configurations upon request. Innovcable reserves the right to change this catalog without prior notice.
