FLEXIBLE CABLES (fixed use) NBR/IEC
Flexible Cables LSZH – IEC
INNOVCABLE CABLE INNOVTOX H07Z-K 450/750V 70°C
1-) Conductor: Bare electrolytic copper wires, soft temper, class 4 stringing up to the nominal section of 6.00 mm² and class 5 stringing from section 10.00 mm² (extra flexible) in compliance with the ABNT NM 280 standard 2-
) Insulation: Non-halogenated polyolefin thermoplastic compound (LSHF/A), low EI5 polyolefin. emission of smoke and toxic gases in case of fire. Does not contain lead, free of heavy metals.
Mechanical characteristics:
– Good mechanical resistance to impacts
– Good cable flexibility
– Min radius. of curvature: 8 (xD)
Voltage Rating: 450 – 750V
Test Voltage: 2,500V
Identification
Sections 1.5 mm² to 6 mm²: Black, blue, green, white, red, yellow, gray and green/yellow.
Sections 10 mm² to 300 mm²: Black, blue, green, white and red.
– OTHER COLORS ON REQUEST.
Applicable Specifications
Applications
They can be used in all types of internal and fixed installations, suitable for places with high occupation density and/or difficult escape conditions, such as shopping malls, hotels, hospitals, schools, theaters, football stadiums, etc. does not propagate flames, is free of halogens and has low smoke and toxic gas emissions. Does not contain Lead. Free of heavy metals.
Maximum Conductor Temperature
– Permanent regime: 70 ºC
– Overload regime: 100 ºC
– Short circuit regime: 160
Notes
– The dimensions shown are nominal and therefore subject to normal manufacturing tolerances;
– It can be manufactured in another section, dimensional or material at the customer’s request.
– Innovcable reserves the right to change this catalog without prior notice.
INNOVCABLE CABLE INNOVTOX N2XH 0.6/1kV 90°C
1-) Conductor: Bare electrolytic copper wires, soft temper, class 4 stringing up to the nominal section of 6.00 mm² and class 5 stringing from section 10.00 mm² (extra flexible) in compliance with the ABNT NM 280 standard
) HEPR insulation 90°C – extruded thermoset compound based on high modulus ethylene propylene.
3-) Cover: Thermoplastic compound SHF1 (LSHF), non-halogenated, non-flame resistant, with low smoke and toxic gas emissions.
Mechanical characteristics:
– Good mechanical resistance to impacts
– Good cable flexibility
– Min radius. of curvature: 8 (xD)
Voltage Rating: 0.6/1kV
Identification
INSULATION COLOR
1 Conductor: White;
2 Conductors: Blue and black;
3 Conductors: Blue, black and white;
4 Conductors: Blue, black, white and red.
* Insulation colors may vary according to customer request and according to item 11.3 of standard NBR 6251.
COVER COLOR
1 Conductor: Black, blue, green, white or red;
2 Conductors: Black;
3 Conductors: Black;
4 Conductors: Black.
– OTHER COLORS ON REQUEST.
Applicable Specifications
Applications
They can be used in all types of internal and fixed installations, suitable for places with high occupation density and/or difficult escape conditions, such as shopping malls, hotels, hospitals, schools, theaters, football stadiums, etc. does not propagate flames, is free of halogens and has low smoke and toxic gas emissions. Does not contain Lead. Free of heavy metals.
Maximum Conductor Temperature
– Permanent regime: 90 ºC
– Overload regime: 130 ºC
– Short circuit regime: 250 ºC
Notes
– The dimensions shown are nominal and therefore subject to normal manufacturing tolerances;
– It can be manufactured in another section, dimensional or material at the customer’s request.
– Innovcable reserves the right to change this catalog without prior notice.
